Ford F-Series, America’s best-selling truck, are making a bold Built Ford Tough statement at SEMA by maximizing off-road performance, blazing new trails of adventure and delivering pure raw power.

The possibilities seem endless as Ford NASCAR drivers, country music stars and famed tuners bring distinctive style and capability F-150 and Super Duty.

With more than 50 vehicles on display, Ford will feature the largest original equipment manufacturer exhibit at SEMA. Plus, Ford Out Front will offer attendees an interactive experience of riding in a performance car or truck on a closed course.

Kurt Busch and ZB Customs 1000-hp 2018 F-150 Lariat Sport Cranks Power, Tunes and Hot Laps

This 2018 Ford F-150 Lariat Sport 4x2 SuperCab by ZB Customs and Kurt Busch is a 1,000-horsepower cruiser designed to shred tires and turn heads wherever it goes. The force-fed 5.0-liter Ford V8, it has On3 twin turbochargers, JE forged pistons, Ford Performance forged rotating assembly, oil pan and pump and a side-exit exhaust.

ZB Customs added its 4.5-inch wide body fenders, bumpers and grille insert, plus a DezignWorks carbon spoiler and splitter and Axalta Electron Blue custom pearl ghost graphics. Inside, ZB Customs installed alligator leather seats, steering wheel and armrests. A Ford Accessories subwoofer by KICKER Audio puts the finishing touches on this show-stopper F-150.

Base vehicle

• 2018 F-150 Lariat Sport 4x2 SuperCab
• 5.0-liter Ti-VCT V8 engine
• 10-speed automatic transmission

Powertrain

• Ford Performance forged rotating assembly, road racing oil pan and pump and side-exit exhaust
• The Driveshaft Shop chrome-moly 3.5 x 0.095-inch prop shaft
• JE forged EN coated pistons
• On3 twin turbochargers and intercooler
• Total Seal zero gap piston rings

Chassis

• Ford 9.75-inch flipped axle
• Brembo eight-piston front calipers with 412 x 38-millimeter rotors and four-piston rear calipers with 380 x 28-millimeter rotors
• Eaton Detroit Truetrac locker
• JRi Shocks hydraulic ride height system
• KBI custom upper control arms
• MaxTrac Suspension two-inch dropped front spindles
• PAC Racing coil-over springs and sway bars

Wheels and tires

• ForgeLine Motorsports monoblock FF3T wheels, 22 x 12 inches
• Goodyear Eagle F1 SuperCar G2 tires, 285/35-R22

Exterior

• Axalta Electron Blue with custom pearl ghost graphics
• DezignWorks carbon spoiler and splitter
• ZB Customs 4.5-inch wide body fenders, widened bumpers and grille insert

Interior

• Ford Accessories subwoofer by KICKER Audio
• ZB Customs alligator leather seats, steering wheel and armrests

SpeedKore’s F-150 custom Pro-Touring Edition strikes a powerful cord with country music star Brantley Gilbert

SpeedKore Performance Group’s 2018 F-150 XLT short-bed pickup pushes Built Ford Tough design even further to communicate its ultra-performance pro-touring truck credentials. It all begins under the hood with the base 5.0-liter twin-cam V8 with Ford Performance supercharger, cold-air intake and side-exit exhaust. It’s backed up with MaxTrac Suspension front lowering spindles, Crown three-inch lowering springs and Brembo eight-piston big brakes. Traction and grip come from Pirelli^® Scorpion tires^™ mounted to 22-inch HRE TR106 monoblock custom wheels.

A SpeedKore specialty, carbon fiber features prominently in this build in the front fenders, splitter, taillight panel, matching exhaust tips and interior highlights. The exterior features custom gray PPG paint, while the interior gets the full custom European leather treatment from Gabe’s Custom Interiors.

Base vehicle

• 2018 F-150 XLT 4x2 Regular Cab  
• 5.0-liter Ti-VCT V8 engine
• 10-sped automatic transmission

Powertrain

• Ford Performance supercharger with TVS technology, cold-air intake and side-exit exhaust

Chassis

• Brembo BM-8 two-piece eight-piston big brake system with vented and drilled rotors
• MaxTrac Suspension front lowering spindles
• Crown three-inch lowering springs

Wheels and tires

• HRE TR106 monoblock [CR1] custom satin bronze wheels, 22 x 10 inches
• Pirelli Scorpion tires, 305/40-22

Exterior

• SpeedKore custom PPG paint, carbon fiber splitter, front fenders, heat extractors, brake vents, mirror covers, cab panels, tailgate appliqué, door handles and tailgate handle, plus Brantley Gilbert-inspired custom guitar and amp rack

Interior

• Gabe’s Custom Interiors bomber-distressed European leather in espresso brown with bronze French stitching

Gen-2 Full-Race Motorsports ‘Freak-O-Boost’ blends a vision for hardcore F-150 EcoBoost performance with go-anywhere, weekend warrior outdoor utility

Full-Race Motorsports’ Gen-2 “Freak-O-Boost” F-150 pickup is loud, proud and sure to draw a crowd. It starts with Ford’s 3.5-liter EcoBoost V6 engine with Full-Race twin turbo upgrade, CARB approved intercooler, cold-air intake, charge pipes and cat-back exhaust. ICON Vehicle Dynamics springs, suspension and 17-inch bead-lock wheels help put the power to the dirt.

Outside, the F-150 wears Fiberwerx 4.5-inch wide body fenders and bedsides, Rogue Racing front/rear Enforcer bumpers, Ford Performance side steps and Maxxis RAZR MT tires. A bold orange and blue paint scheme with custom Morimoto projector headlamps and LED lighting from Rigid are the finishing touches.

Base vehicle

• 2018 F-150 XLT Sport 4x4 SuperCab
• 3.5-liter EcoBoost V6 engine
• 10-speed automatic transmission

Powertrain

• Full-Race Motorsports California Air Resources Board-approved intercooler kit, cold-air intake, charge pipes, cat-back exhaust, twin-turbo upgrade, radiator, transmission oil cooler, catch can
• HeadGames Motorworks cylinder heads
• XDI high-flow fuel pump
• Yukon Gear 4.88:1 ring and pinion

Chassis

• Icon Vehicle Dynamics three-inch front coil-over and three-inch rear bypass kit, billet Raptor front upper control arm kit and rear leaf spring and bump-stop kit
• Raybestos slotted rotors, performance brake pads and stainless braided lines

Wheels and tires

• Icon Vehicle Dynamics compression wheels, 17 x 8.5 inches
• Maxxis RAZR MT tires, 37 x 12.5 inches

Exterior

• Ford Performance by WARN^® Industries recovery kit includes two-inch by 22-foot blue recovery strap rated to 14,400 pounds, a ¾-inch D-shackle rated to 18,000 pounds, storage bag and winching gloves
• Ford Performance race side steps
• DECKED bed storage system
• FiberwerX 4.5-inch wide body fenders and bedsides
• Morimoto projector headlamps from TRS
• RIGID LED lighting
• Rogue Racing front and rear Enforcer bumpers
• Undercover Ridgelander cover and biking accessory kit
• Avery Dennison supreme wrapping film applied by Wrapsesh

Interior

• Switch Pros SP-9100 bezel-style eight-switch panel power system
• Katzkin full leather treatment

Transfer Flow builds the ultimate family adventure pickup, pairing the power of F-150 with the latest off-road upgrades and accessories

California-based Transfer Flow has created the ultimate family Ford F-150 adventure truck that leverages the efficient power of the all-new 3.0-liter Ford Power Stroke^® diesel, taking it to new heights with off-road suspension, powertrain and accessory upgrades. Add in Fab Fours Vengeance front and rear bumpers and roof rack, Yakima kayak rack, a Transfer Flow 50-gallon fuel tank and 40-gallon in-bed auxiliary toolbox combo with refueling kit and movie projector screen inset for maximum getaway fun.

Base vehicle

• 2018 F-150 Lariat Sport 4x4 SuperCrew
• 3.0-liter Power Stroke diesel V6 engine
• 10-speed automatic transmission

Powertrain

• Borla DPF/SCR-back exhaust with dual anodized black tips

Chassis

• Hellwig Products auto level compressor kit, Big Wig air spring kit, and front and rear sway bars
• Pro Comp six-inch Stage 2 coil-over kit

Wheels and tires

• Pro Comp 61 Series Congo wheels, 20 x 9 inches
• Pro Comp Xtreme MT2 tires, 35/12.5-R20

Exterior

• Ford Accessories kayak rack by Yakima and molded fender flares by Bushwacker
• Ford Performance five-inch angular step bars in Magnetic paint
• Fab Fours Vengeance front and rear bumpers and universal roof rack
• CW Wraps full body wrap
• RIGID underbody lighting
• Transfer Flow 50-gallon replacement fuel tank and 40-gallon in-bed auxiliary toolbox combo with refueling kit upgrade and movie projector screen inset

Interior

• Ford Performance by WARN Industries recovery kit includes 22-foot by two-inch blue recovery strap rated to 14,400 pounds, a ¾-inch D-shackle rated to 18,000 pounds, storage bag and winching gloves
• Rockville touch screen DVD/HDMI nine-inch headrest monitors
• Qable Powerz^™ multicolor lighting
• Potek 2,000-watt power inverter with AC/USB ports
• KICKER Q-class component speaker system

Extang teams with college students to build ultimate tailgate truck

Michigan-based Extang Truck Bed Covers enlisted the help of local college students to help build this custom Ford F-350 Super Duty Lariat. The ultimate tailgate truck features a slide-out game table, cooler, BBQ grill and large-screen OLED television and sound system designed by Extang engineers and built by students from Washtenaw Community College’s Custom Cars and Concepts program.

Base vehicle

• 2019 F-350 Super Duty Lariat 4x2 dual-rear-wheel Crew Cab
• 6.7-liter Power Stroke turbo diesel V8 engine
• Heavy-duty TorqShift 6-speed SelectShift automatic transmission

Powertrain

• Ford Performance exhaust tailpipe with custom black tip

Chassis

• Custom-designed bolt-on suspension by ARFT’s Speed Shop [CR1] with four-link rear end
• Air Lift Performance 3P air management system includes four-corner pressure control, SMC fittings and lines, VIAIR air compressors and Dominator 2600 air springs

Wheels and tires

• Fuel Off-Road Wheels DRW Maverick 24-inch custom copper-plated wheels with black-painted accents and custom babymoon lug covers
• Dilente DX10 Bandit A/T tires, 285/40-24

Exterior

• Ford Accessories hard folding bed cover by Extang, sportliner by BedRug and front wheel well liners
• Black custom-painted Ford platinum grille
• AkzoNobel Modern Classikk Black Hole Black^® paint with Sikkens Autoclear^® clear coat custom-applied by students from Washtenaw Community College’s Custom Cars and Concepts program
• Billet custom copper-plated F-350 fender badges
• Custom-mounted bed cover integrated with 65-inch LG OLED 4K television
• Custom copper-plated swing-out cooler and grille behind tailgate
• Custom-fabricated low-profile cargo slide with integrated expanding game table
• Shaved door handles with SPAL door poppers by Custom Cars and Concepts students
• Undercover swing cases with custom-installed Maxxsonics MB Quart eight-inch speakers

Interior

• Ford Accessories all-weather floor mats and B&O premium audio system

2019 F-250 Super Duty off-road adventure truck by Wilderness Collective

Wilderness Collective, a leading moto tours company, has leveraged its off-road experience to design its vision of the ultimate adventure Ford F-250 Super Duty pickup. The build begins with an Icon Stage 5 suspension lift kit with Hellwig Products air lift, steering upgrades and WARN Industries manual front hub-lockers. These modifications make room for a massive set of Toyo Open Country M/T tires on 20-inch Fifteen52 TurboMac wheels. The team added a full-guard heavy-duty front bumper, M12 winch and rear ascent bumper from WARN Industries plus a cab and bed rack, rooftop tent, cargo system from Frontrunner, and RIGID light bar spotlight and floods. Power comes from the 6.7-liter Ford Power Stroke diesel with Ford Performance exhaust. Inside, the truck features a full recovery kit from WARN and a Rugged Radios communications system. “Which Way” map graphics were created by Justin Bauer of Wilderness Collective. Bauer will accompany the truck for its maiden trip across the desert en route to the show floor at SEMA.

Base vehicle

• 2019 F-250 Super Duty XLT FX4 Crew Cab
• 6.7-liter Power Stroke turbo diesel V8 engine
• Heavy-duty TorqShift 6-speed SelectShift automatic transmission

Powertrain

• Ford Performance exhaust tailpipe

Chassis

• Icon [CR2] 2.5-inch lift and suspension
• Upgraded front track bar
• Dual opposing steering stabilizer kit
• Hellwig Products airbags and front and rear sway bars
• WARN Industries front wheel manual lockers

Wheels and tires

• Fifteen52 TurboMac wheels, 20 inches
• Toyo Open Country M/T tires, 37 x 12.5 inches

Exterior

• Ford Accessories front and rear wheel well liners
• ARB twin on-board compressor
• Frontrunner cab rack, bed rack, rooftop tent and cargo system
• RIGID Industries light bar, spotlight and flood lights
• Titan sidekick in-bed fuel transfer tanks and XXL stock replacement tank
• Vaderworks full wrap
• “Which Way” artwork by Justin Bauer of Wilderness Collective
• WARN Industries M12 winch, rear ascent bumper, full-guard heavy-duty front bumper
• Wilco Hitchgate spare tire system

Interior

• Ford Performance by WARN Industries recovery kit includes two ¾-inch D-shackles rated to 18,000 pounds, 30-foot by three-inch blue recovery strap rated to 21,600 pounds, heavy-duty snatch block with 12,000-pound capacity, storage bag, and four-inch by eight-foot tree trunk protector rated to 30,000 pounds
• Rugged Radios communications system

2019 F-250 Super Duty Transformer Work Truck by DeBerti Design gets the job done right

Massively strong, extremely capable and incredibly stylish, this F-250 Super Duty 4x4 Transformer Work Truck by DeBerti Design redefines what it means to be the boss. The 6.7-liter Power Stroke diesel has been modified with the addition of a twin-turbo kit from Midwest Diesel & Auto and Fleece Performance Engineering. It features a No Limit Fabrication air-to-liquid intercooler, EGR kit and cold-air intake, and is finished off with a performance diesel tailpipe from Ford Performance. Proformance Diesel worked to dial it all in to crank out 900 horsepower. DeBerti Design added some prime cuts to the Super Duty suspension with Eibach coils, adjustable Fox shocks, Hellwig Products airbags, sway bars and a beefy set of BFGoodrich KR2 37-inch tires mounted to Ultra-Wheel beadlock wheels. The crew will arrive in comfort and style starting with a custom interior and fully custom-fabricated utility bed, pull-out bumper utility box, custom alloy grille and RIGID lights mounted to a light bar rack from DeBerti Design.

Base vehicle

• 2019 F-250 Super Duty Lariat 4x4 Crew Cab
• 6.7-liter Power Stroke turbo diesel V8 engine
• Heavy-duty TorqShift 6-speed SelectShift automatic transmission

Powertrain

• Ford Performance exhaust tailpipe
• Midwest Diesel & Auto twin-turbo kit with 76-millimeter precision turbo
• Fleece Performance Engineering 63-millimeter high-pressure turbo
• No Limit Fabrication air-to-liquid intercooler, oil pan, EGR kit and cold-air intake
• Proformance Diesel collaboration

Chassis

• Cognito Motorsports suspension
• Eibach coils
• Adjustable shocks from Fox
• Hellwig Products airbags and sway bars
• QA1 Motorsports heim joints

Wheels and tires

• Ultra-Wheel beadlock wheels, 17 x 8.5 inches
• BFGoodrich KR2 tires, 37 x 12.5 inches

Exterior

• DeBerti Designs complete custom utility bed with hinges, light bar and rack, pull-out bumper utility box, pre-runner front bumper and T6061 custom grille
• B&W trailer hitch gooseneck flip ball
• BOXO tools
• Bullseye retro headlights
• LGE*CTS Motorsports Baja forged fiberglass fenders and bedsides
• MAC’s tire straps
• Miller Welding products
• Pro Eagle jack
• RIGID LED lights
• Sherwin-Williams paint

Interior

• Ford Performance by WARN Industries recovery kit includes two WARN Industries ¾-inch D-shackles rated to 18,000 pounds, 30-foot by three-inch blue recovery strap rated to 21,600 pounds, heavy-duty snatch block with 12,000-pound capacity, storage bag and four-inch by eight-foot tree trunk protector rated to 30,000 pounds
• Cool It Thermo-Tec sound deadener
• Custom treatment

Blood Type Racing’s Edge ST amps-up Ford Performance’s first SUV

Ford is entering new territory with the Edge ST – the first SUV from the Ford Performance team – and now teams with Chicago-based Blood Type Racing to push the dynamic new entry even further into the performance space. The team upgraded Edge ST’s stealthy design and twin-turbo V6 EcoBoost^® performance with a slammed suspension, its own performance induction, Mishimoto charged intercooler, and an MRT dual stainless performance exhaust to crank up the horses. Blood Type Racing finished it off with low-profile Toyo Tires^® STIII Proxes tires on 22-inch wheels, custom aerodynamics and a gloss blue wrap. Interior features include a SoCal carbon fiber steering wheel, Kicker Bullfrog^® portable audio, Ford Accessories all-weather floor mats and cargo area protector, tablet cradle and cooler bag.

Base vehicle

• 2019 Edge ST
• 2.7-liter twin-turbo EcoBoost V6
• 8-speed SelectShift^® automatic transmission

Powertrain

• BTR custom dual intake system
• Mishimoto intercooler
• MRT exhaust system

Chassis

• Air Lift^® air suspension system

Wheels and tires

• AMF F020 wheels, 22 x 10.5 inches
• Toyo Tires Proxes STIII tires, 265/35-22

Exterior

• Ford Accessories rear bumper protector
• Avery Dennison^® gloss light-blue wrap
• Chicago Auto Pros graphic wrap
• Aerotekk Design custom splitter lip kit
• Rally Armor^® mud flaps

Interior

• SoCal Garage Works custom carbon fiber steering wheel
• Ford Accessories
  • All-weather floor mats
  • Cargo area protector
  • Cargo organizer
  • Cooler bag
  • Tablet cradle
• Kicker Bullfrog portable audio

LGE*CTS Expedition Classic honors vintage off-roaders while offering modern technology 

With vintage design cues, rich materials and high-tech rugged hardware, designer/builder Theresa Contreras created a modern classic for SEMA with her LGE*CTS Expedition Classic. From the purpose-driven matte paint and steel wheels, to the ReadyLIFT^® leveling suspension and Borla^® performance cat-back exhaust, the LGE*CTS Expedition Classic is built for adventure – and getting you there in ultimate style. Finishing touches include custom-painted Yakima OffGrid roof rack and coordinating Ford Accessories.

Base vehicle

• 2018 Ford Expedition XLT 4x4
• 3.5-liter EcoBoost V6 engine
• 10-speed SelectShift automatic transmission

Powertrain

• Borla cat-back exhaust system with Borla custom exhaust tips

Chassis

• ReadyLIFT suspension leveling kit
• Hellwig Products front and rear sway bars

Wheels and tires

• Wheel Vintiques^® steel wheels, 18 x 8 inches
• BFGoodrich^® Mud-Terrain T/A^®KM2 tires, 285/70-18

Exterior

• Ford Licensed Accessories custom-painted Yakima^® Off-Grid large roof basket w/extension
• Ford Licensed Accessories Napier tent
• LGE Baja Forged front bumper
• Rigid Industries 20-inch Radiance light bar
• Yakima Products
  • Spare tire carrier
  • Stretch nets (large and medium)
  • Security straps, 2
  • Top grips, 2
  • End caps, 2
  • Axel/shovel bracket

Interior

• Ford Performance by WARN^® Industries Recovery Kit
  • 2-inch x 22-foot blue recovery strap - rated to 14,400-lbs.
  • ¾-inch D-shackle - rated to 18,000-lbs
  • Instruction manual
  • Storage bag
  • Winching gloves
• Ford Licensed Accessories
  • All-weather floor mats
  • DC Safety first aid and roadside assistance kit
  • Portable audio by Kicker
  • Vehicle safe by Console Vault
  • Yakama mugs, four
• Rogelio’s custom leather seats

Destination Expedition: Hulst Customs’ ultimate family adventurer

This Hulst Customs 2018 Destination Expedition is the ultimate SUV – a custom luxe cruiser designed to get you to where you are going in comfort, class and style. A custom hood and grille, plus custom Borla cat-back exhaust with custom-fabricated tips give a nod to its performance DNA. Color-matched 26-inch Lexani wheels and tires fill out the fender wells, while stunning custom gray paint with lower graphics give this Destination Expedition a truly rich and distinctive appearance. A custom drop visor with LED running lights and Yakima snowboard rack put the finishing touches on this one-of-a-kind family hauler.

Base vehicle

• 2018 Ford Expedition Max 4x4 Limited
• 3.5-liter EcoBoost V6 engine
• 10-speed SelectShift automatic transmission

Powertrain

• Borla cat-back exhaust system with custom-fabricated exhaust tips

Wheels and tires

• Lexani LF-002 forged wheels, 26 x 10 inches
• Lexani tires, 305/30-26 tires

Exterior

• Ford Licensed Accessories roof rack crossbars
• Custom grey paint provided by Industrial Finishes with lower graphics, black greenhouse, color-matched wheels and details
• Hulst Customs grille insert with aluminum center
• Hulst aluminum exhaust tips
• Striker custom hood
• Striker drop visor with LED running lights
• Yakima FatCat snow board carriers
• Outlier snowboard from Deviation Snowboard Works
• Solomon^® snowboard bindings

Interior

• Ford Licensed Accessories
  • Full-floor center console vehicle safe by Console Vault
  • Bullfrog outdoor Bluetooth speaker by Kicker
  • All-weather floor mats
  • Cargo organizer
• E3D patterned components
• Ambient lighting

MAD Industries Explorer blends style and athleticism

California-based MAD Industries created a high-fashion design that blends style and performance with this custom Explorer. The two-tone Explorer’s performance is upgraded with more aggressive handling tuning and more braking power. The interior features premium leather seats, custom MAD Industries steering wheel and unique touches including billet aluminum pedals, color-matched accents and LED lighting.

Base vehicle

• 2018 Explorer Sport
• 3.5-liter EcoBoost V6 engine
• 6-speed SelectShift automatic transmission

Powertrain

• JMS^® PedalMAX^® and BoostMAX^® plug and play performance solution
• Borla S-Type cat-back exhaust with quad tips

Chassis

• Eibach^® PRO-PLUS performance handling package
• Power Stop^® Z36 SUV high performance cross drilled and slotted rotors
• Power Stop Z36 Extreme brake pads

Wheels and Tires

• Niche Road Wheels Alpine-style forged, custom finished in Candy Black with brushed face wheels, 24 x 10 inches
• TOYO Tires Proxes ST tires, 285/35ZR-24

Exterior

• BASF R-M^® custom Ruby Red and Jet Black paint with two-tone graphic
• Clear paint protection film
• MAD Industries shaved roof rack

Interior

• MAD Industries custom black premium leather seating with red accent stitching
• Select color-matched interior parts in high-gloss black and Ruby Red
• SRP anodized billet aluminum racing pedals
• Rockford Fosgate^® high-performance audio system
• 3M^™ Crystalline window film

Accessories

• Ford Licensed Accessories
  • Cargo liner
  • Cargo Soft organizer
  • DC Safety first-aid and roadside assistance kit
  • Vehicle safe with full-floor center console by Console Vault
• AL^® Priority Quint laser defense and parking system

Tucci Hot Rods gives EcoSport go-anywhere, do-anything treatment

This Tucci Hot Rods Big Adventures EcoSport gives an all-new meaning to the concept of compact sport utility vehicle. The team started with custom fender flares and beefy Maxxis Bravo AT tires, then followed with off-road accessories including an integrated winch, custom tubular bumpers, Rigid Industries lighting and Yakima bike rack. The result is a highly capable, efficient, fun package from an award-winning team that will turn heads and open the great outdoors to a new generation of compact SUV builders.

Base vehicle

• 2018 Ford EcoSport SES 4WD
• 2.0L Ti-VCT GDI I-4 engine
• 6-speed SelectShift automatic transmission

Powertrain

• K&N air filter
• Borla custom Ford Performance exhaust

Chassis

• ISC Suspension N1 coilovers

Wheels and Tires

• Fifteen52 Turbomac HD wheels, 16 x 8 inches
• Maxxis^® Bravo Series AT tires, 255/65-16

Exterior

• Dom Tucci Design custom 3D-printed fender flares
• Rigid Industries lighting
  • Radiance DXL
  • Amber fog lights
  • Chase brake light
  • Rock lights, cool white and amber
• Tucci rear diffuser
• Tucci front and rear tubular bumpers
• WARN^® AXON™ 35-S Powersport winch
• Yakima Highroad bike rack

Interior

• Ford Accessories cargo liner
• Ford Accessories all-weather floor mats

Top tuners are at it again cranking up America’s favorite sports car even more for the 2018 Specialty Equipment Manufacturers Association Show, showcasing why Mustang is one of the world’s most customized vehicles.  Having grown into an all-around global sports car, these five tuned Mustangs will see all performance ingredients enhance to help Mustang fans make a statement on nearly any track or street they choose. 

With more than 50 vehicles on exhibit, Ford will feature the largest original equipment manufacturer display at SEMA. And don’t miss the interactive experience from Ford Out Front, offering attendees a ride in a Ford performance vehicle on a closed course and chances to meet racing personalities across various series.

Galpin Auto Sports takes Mustang GT to the track with its wide-body inspired road racer

This Galpin Auto Sports (GAS) build boasts an aggressive yet sleek road racing inspired wide body design, with additional downforce measures incorporated into the front splitter, side rockers, and rear diffuser.  The team included the very best Ford Performance parts to up the street cred with big horsepower and a full track-focused suspension.

Base vehicle

• 2018 Mustang GT fastback
• 5.0-liter Ti-VCT V8 engine
• 6-speed manual transmission

Powertrain

• Ford Performance/Roush supercharger
• Ford Performance cat-back exhaust
• Ford Performance short-throw shifter
• Ford Performance driveshaft, half-shafts

Chassis

• Ford Performance springs, shocks and sway bars
• Ford Performance Shelby GT350R fixed caliper brakes

Wheels and tires

• Custom-painted 1221 Apex 2.0-style wheels
• Toyo Proxes tires, R888-R 305/35/ZR-20

Exterior

• GAS custom domestic tuner market wide-body kit full ground effects kit including splitter, side skirt and slats, rear slat and diffuser
• Pedestal wing
• Custom GAS paint scheme

Interior

Custom seat inserts to match exterior paint scheme

Taunting “Smoke Show”: CJ Pony Parts 5.0-liter supercharged Drifting Mustang GT

CJ Pony Parts brings an American tribute with a metallic twist for this 700-plus-horsepower 2018 Mustang GT. This thoroughbred features Stars and Stripes livery in custom dark shadow gray paint with copper accents including a Watson Racing roll cage in copper. The build showcases a Ford Performance supercharger and follows through with hard-core body and suspension upgrades to deliver a true drift beast.

Base vehicle

• 2018 Mustang GT fastback
• 5.0-liter Ti-VCT V8 engine
• 6-speed manual transmission

Powertrain

• Ford Performance/Roush supercharger
• Ford Performance cat-back exhaust with carbon fiber tips
• Ford Performance short-throw shifter

Chassis

• Ford Performance track lowering springs
• UPR independent rear suspension upgrades
• Sikky Manufacturing hydraulic handbrake

Wheels and tires

• HRE FF04 satin gold wheels
• Michelin Pilot Sport 4 S tires, 265/35ZR-20 front, 305/30ZR-20 rear

Exterior

• Anderson Composites wide-body kit, hood and trunk
• Roush Performance front splitter, rear foil and window scoops
• Rally Innovations custom splitters
• Custom dark shadow gray paint by GCR Collision

Interior

• Ford Performance seats by Recaro
• Watson Racing roll cage
• Corbeau five-point safety harness

CGS Motorsports Mustang GT: Making sinister more tasteful

CGS Motorsports brings tasteful modifications to a 2018 Mustang GT with this clean interpretation of modern muscle. Large 410-millimeter rotors combine with six-piston Brembo calipers to deliver the stopping power necessary to properly tame this vicious steed. Nighttime driving in this supercharged Mustang is a well-illuminated affair thanks to unique LED lighting from a complete conversion by Diode Dynamics to Rigid undercar lighting. Everyone from night owls to track rats can prowl or stalk tracks in this stylishly sinister Mustang.

Base vehicle

• 2018 Mustang GT fastback
• 5.0-liter Ti-VCT V8 engine
• 6-speed manual transmission

Powertrain

• Ford Performance/Roush supercharger
• Ford Performance cat-back exhaust with carbon fiber tips
• Ford Performance carbon fiber shift knob

Chassis

• Ford Performance spring kit and sway bar
• Six-piston fixed Brembo calipers with 410-millimeter rotors

Wheels and tires

• Savini forged wheels, 22 x 9.5 inches front, 22 x 13 inches rear
• Pirelli P-Zero tires, 255/30/ZR-22 front, 335/35/ZR-22 rear

Exterior

• Custom TS Designs wide-body kit
• Air Design hood vents and rear spoiler
• Custom Axalta paint by Andy Meeh of Flying Iron Designs
• Diode Dynamics LED lighting
• Rigid undercar LED lighting

Interior

• Napa leather interior by Alea Leather
• Diode Dynamics LED lighting

TJIN Edition EcoBoost Mustang takes turbo-charged fun to the next level

This EcoBoost^®-powered 2018 Mustang by TJIN Edition manages to shout even when parked with hypnotic Electric Purple paint combined with rivet style custom bodywork and RTR parts. An adjustable air suspension provides a slammed look when desired while still showcasing the Forgeline center-lock 20’s wheels. Putting some serious beast in the EcoBoost comes courtesy of a turbo kit from Full-Race with upgrades by BorgWarner.

Base vehicle

• 2018 Mustang coupe
• 2.3-liter EcoBoost engine

Powertrain

• Ford Performance cat-back exhaust
• BorgWarner high-performance turbocharger
• Full-Race manifold, downpipe, intercooler and charge pipes
• Ford Performance shifter

Chassis

• Ford Performance strut brace
• Fully adjustable suspension by Air Lift^® 3H
• VIAR compressors
• Baer Grizzlie big brakes, front

Wheels and tires

• Center-lock Forgeline wheels, 20 x 10.5-inch front, 20 x 13-inch rear
• Michelin tires, 275/30-20 front, 335/25-20 rear

Exterior

• RTR body kit, including front and rear fenders, upper and lower grille, front chin spoiler, rear diffuser, rocker and rear quarter splitters, bumper inserts, hood extractors and rear wing
• QuickLift hood props
• Yellow fog lamps
• Custom bodywork and paint by LTMotorwerks
• Custom Electric Purple paint by PPG

Interior

• Recaro Sportster CS in black Katzkin leather
• Katzkin black leather rear seats
• Kicker Audio designed by LTMotorwerks
• RTR shift knob and floor mats

Bojix Design Mustang GT brings both flash and dash

Subtlety be damned, this flashy 2018 Mustang GT will draw crowds everywhere it goes even amongst the wild designs of the SEMA Show. Bojix brings us another showstopper in stimulating two-tone blue and gray with wide 20-inch Savini wheels putting the appeal to the pavement. A rear seat-delete and upgraded aero elements emphasize this pony car is both show and go.

Base vehicle

• 2018 Mustang GT fastback
• 5.0-liter Ti-VCT V8 engine
• 6-speed manual transmission

Powertrain

• Bojix Design supercar exhaust with Borla mufflers
• Ford Performance driveshaft loop

Chassis

• Ford Performance springs, shocks and sway bars
• Ford Performance front and rear hubs with extended wheel studs
• Two-piece Brembo rotors and fixed calipers

Wheels and tires

• Savini SV67 wheels, 20 x 10-inch front, 20 x 11.5-inch rear
• Nitto NT05 tires, 305/30/R-20 front, 315/35/R-20 rear

Exterior

• Air Design front bumper with splitter, rocker panels and hood vents
• APR carbon fiber front splitter and drag wing
• Bojix Design lower front grille edit
• Custom Bojix PPG paint scheme
• Ford Performance hood struts and tie-down kit
• Ford Performance decklid trim panel

Interior

• Recaro Sportster CR black leather seats with black stitching
• Rear seat-delete
• Kicker Audio with 10-inch solo baric L7 subwoofers